Posted by: Nick - Ex Member Posted on: 07/09/04 at 20:20:30
Thyanks Glenn I'll give it a try
Posted by: Admin Posted on: 07/09/04 at 16:54:14
Sikaflex 292 - awesome stuff. You can get them at most marine stores.
Posted by: Prez - Ex Member Posted on: 07/09/04 at 16:35:28
Hey Nick, Back to Dad taking over your boat on Washington. Some advice for you, buy Dad a brand new set of golf clubs and set him up a Tee time! Aren't Dads supposed to be golfing anyway? Congrats on the new flotation device! About all this rivets and welding, we need to remember that leaks are going to happen. The rougher you are on it, the faster it'll leak. Unless you're in a tournament, what's the hurry? My old Tracker was 10 years old before the leaks took over. Don't take all this too seriously or stress about it. Enjoy the sport and remember, a boat is a tool. Does a mechinics tools look brand new forever? Not if he uses them!! Have fun, RON
Posted by: Rich - Ex Member Posted on: 07/09/04 at 14:13:47
Hhhmmm, might be a good idea to always be chewin' some gum!! But don't use the sugar free stuff. It doesn't stick too good.
Give 'em hell, Neal
Rich
Posted by: Nick - Ex Member Posted on: 07/09/04 at 03:24:51
Thanks Sarge
Posted by: sarge - Ex Member Posted on: 07/09/04 at 03:12:03
Nick,
If you can access the rivet from inside, the best thing might be to try hammering the rivet from both sides at the same time and mushrooming it. It's ugly, but works pretty well. Every sealant I tried seemed to wear out over time.
Ron H. used some stuff he called "gutter tape" (I think... maybe he can correct me) on an aluminum hull, and it seemed to seal really well.
Chris
Posted by: Nick - Ex Member Posted on: 07/09/04 at 02:44:30
Hey guys What kind of sealant would you guys suggest for a leaky rivet.
Thanks
Posted by: Nick - Ex Member Posted on: 07/09/04 at 02:28:53
Well if any of you other tin boat owners need a welder! Tell me! My uncle a good welder! He used weld boats for a living! Then I know a guy well he's the guy I work for he's a mobile welder! so If you need anyone I've know people who can help
Posted by: Admin Posted on: 07/08/04 at 21:07:29
Rivets are easy to replace, it's the welding that's a problem....an expensive problem.... and hard to find somebody who can do the work. Even then, the hull isn't that thick - not very good for welding. Plus the internal foam melts if luck is on your side, catches on fire if not.
Posted by: Nick - Ex Member Posted on: 07/08/04 at 19:30:27
Thanks Guys
Posted by: y2says - Ex Member Posted on: 07/08/04 at 19:29:30
Thanks for the report. It was tough for me too on Tuesday with the wind and rain. Took a beating on my new G3 boat.
Posted by: Rich - Ex Member Posted on: 07/08/04 at 13:50:42
YES, there is a God. HAHA Nick, this is the payback for all of the kids that always want to borrow OUR car or boat. The shoe is on the other foot. Hhhmmm, maybe I should have said the glove is on the other hand... Oh well you know what I mean.
All seriousness aside Nick, congrats on the boat and just remember those famous last words, "You had better not bring it back on EMPTY, Son, I mean DAD!!!"
Rich
Posted by: sarge - Ex Member Posted on: 07/08/04 at 13:45:41
You can vent whenever you want, Nick. Hehehe.
Oh ya, don't listen to Doug unless he is going to let you pull up to the Boeing shop and use the rivet guns and welding machines!
Chris
Posted by: Doug_Booth - Ex Member Posted on: 07/08/04 at 05:54:07
Nick, as a fellow tin (tracker) owner, and a ex-Boeing employee, I say rivets are made to be replaced so knock yourself out with your new boat. It's a consist battle to keep my boat water tight. The good news is that the Panacea is back on the water. The bad news is that Momma put the kabash on the J & J due to $ issues. I looking forward to seeing you on the water. If your dad wears a skirt maybe you can take my place at Moses Lake...
Posted by: Nick - Ex Member Posted on: 07/08/04 at 04:15:07
Thanks Sarge, Just to let you know I'm a little ticked at my father at the present time. He's taking my boat as if it's his own. asking me if it's okay if he can take out and such. Oh he also took over the controls at washington and let it rip at full speed when I didn't even have any of the rods taken care of. Plus I'm the one who bought the boat so shouldn't I be driving. He all most allowed my rod with my curado reel blow out.