Normal Topic 332C Issue (Read 1095 times)
RussBaker
Ex Member


332C Issue
01/21/07 at 17:29:28
Quote Print Post  
Do any of you guys run the Lowrance 332C and have had the unit read 2.5 feet when your in over 60 feet of water while you were running? Or have the unit tack on an extra 20 feet to the reading?

Not pleased with 332C quality.

Any way to fix other than shooting to Lowrance?
Russ
  
Back to top
 
IP Logged
 
Larry S.
Ex Member


Re: 332C Issue
Reply #1 - 01/21/07 at 17:52:03
Quote Print Post  
Maybe Puck placement might be in front of or behind pad.......otherwise you might go into settings and reset your depth settings to default as they might have gotten scrubbed....other than that I believe it is a trip to the shop.
  
Back to top
 
IP Logged
 
Troy
Ex Member


Re: 332C Issue
Reply #2 - 01/21/07 at 22:20:21
Quote Print Post  
i have that unit and have not had any problems at all.  if its only when your running then larry's explanation makes sense. or maybe its interference from the outboard  ???.
  
Back to top
 
IP Logged
 
DUNE HOPPER
WBC Member
*
Offline


USMC Ret.  "Full Livewells,
I'll drink to that!"

Posts: 1353
Location: Kennewick, WA
Joined: 08/21/02
Re: 332C Issue
Reply #3 - 01/22/07 at 14:30:48
Quote Print Post  
The only problem I've encountered occurred while running on pad in water deeper than 40', and with all three depth-finders running.  They will all lose bottom lock and then not be able to find it again until I shut one down momentarily.  Once I power it back up, no problemo. Grin

Smitty Wink
  

Retired From Everything but Feeshin and doing April's bidding
Back to top
 
IP Logged
 
Bookmarks: del.icio.us Digg Facebook Google Google+ Linked in reddit StumbleUpon Twitter Yahoo